Open Automation Software
Moving Data From Anywhere to Anywhere
1-303-679-0898

Getting Started – Live Data Cloud

Use the following steps to activate a data source server with a Live Data Cloud server.

Note: You do not need to enable the following Live Data Cloud feature if your data source servers have fixed IP addresses and are directly accessible from all client systems.  This Live Data Cloud feature is typically used to connect client devices to data servers that do not have a direct communication on their own or the data servers have a dynamic IP address without a network node name.

After completing the following steps for each data source server you want to host data from view Live Data Cloud Networking on how to setup each client to access data through a Live Data Cloud server to a data source server.

Step 1

Getting Started-Tags 1Start Configure OAS application.

 

 

Step 2

From the data source service select Configure-Live Data Cloud.

Getting Started-Live Data Cloud

Step 3

Select the Local OAS Service by selecting the Select button or the Local node in the service tree to the left.

Getting Started-Tags 3

Getting Started-Tags 4

Step 4

Click the CheckBox to Enable Hosting and enter the IP address, network node name, or registered domain name of the central Live Data Cloud server in the Server field.

Enter a unique Hosting Name for the data source server.  Each data source server should have a unique name that is connected to the Live Data Cloud server.

Getting Started-Live Data Cloud

Enter each receiving client IP Address and Port Number and select Add.

Step 5

Select the Save button on the toolbar at the top.

Getting Started-Tags 19

Step 6

Save the file myDataCloudConfig.RemoteSCADAHosting in the directory of your choice.

You can specify for this configuration to load automatically when the Service starts using Configure-Options to specify this default Remote SCADA Hosting file.

Step 7

In the Live Data Cloud server it is possible to restrict which data source services can connect through it.  On the Live Data Cloud server go to Configure-Options-Networking.  If you have enabled the CheckBox Disable Live Data Cloud found there use the Add button in the lower right to add the newly assigned data source server.

Getting Started-UDP Broadcast

View Live Data Cloud Networking on how to setup each client to access data through a Live Data Cloud server to a data source server.